Galvanized steel bottom guide profile with holes for cantilever sliding gate 70 × 60 x 3.5 mm – 6.0 m

Galvanized steel bottom guide profile with holes for cantilever sliding gate 70×60x3,5 mm – 6.0 m
Product code: H/02-70x60-Zn-D-6000

The galvanized steel guide profile is designed for cantilever sliding gates. It ensures stable guidance and smooth movement of the gate leaf. Thanks to the mounting holes, it can be screwed to the gate frame, or it can be welded to the frame.
For the design of the running system, use Gate Dimensioning.

Material
Structural steel.

Surface finish
Galvanizing to protect the steel surface from corrosion.

Dimensions and technical parameters
Profile dimensions: 70 × 60 mm.
Wall thickness: 3.5 mm.
Length: 6 000 mm.
Design: with mounting holes.
Installation: by screwing or welding to the gate frame.

Installation and compatibility
The profile is attached to the frame of the cantilever sliding gate by screwing through the prepared holes or by welding. It is used with compatible support carriages selected according to the passage width and gate weight. When designing the running system, carriages and other components corresponding to the passage width and gate weight must be selected: (product code SV-70x60Zn clasic) or (product code SV-70x60Zn clasic-Nylon) after replacing profiles with holes. A suitable set of running components can be designed using the Gate Dimensioning application.
When welding galvanized parts, safety precautions must be observed to protect against fumes from the zinc layer. After welding, damaged areas of the surface finish must be properly treated.

Advantages
Galvanized surface for corrosion protection.
Mounting holes for screwing to the gate frame.
Possibility of attachment also by welding.
Stable guidance and smooth movement of the gate leaf.
Length 6 m suitable for the production of a cantilever sliding gate.